How to prevent six measures from damage in hardware processing factories? We can see hardware everywhere. What kind of protection does our hardware need? How to maintain them and prevent them from being damaged. We will introduce its protective measures from six aspects.
1. The model, specifications, and performance of the selected hardware accessories should comply with current standards and relevant regulations, and match the selection of plastic steel doors and windows.
2. Hardware accessories should be installed last, and door and window locks, handles, etc. should be assembled after the window and door leaves are framed to ensure correct position and flexible opening and closing.
3. For sliding windows with a width exceeding 1 meter or doors and windows with double-layer glass installed, it is advisable to install double pulleys or use rolling pulleys.
4. After the installation of hardware, attention should be paid to maintenance to prevent rust and corrosion. When using in daily life, it is necessary to close and open gently to prevent hard closing and opening, which may cause damage to plastic steel doors and windows.
5. Sliding support hinges shall not be made of aluminum alloy materials, but shall be made of stainless steel materials.
6. When installing hardware with fastening screws, a metal lining plate must be installed inside, and the thickness of the lining plate should be at least twice the pitch of the fastener teeth. It shall not be fastened on plastic profiles, nor shall non-metallic linings be used.
The above is the summary provided by the editor on how hardware factories can prevent damage to hardware processing parts. We hope it is helpful to everyone and welcome you to continue following our company's official website.
